ASA not connecting to Definity g3v11

[Kn1ght]

Good Afternoon everyone,

I have having some trouble getting a clients ASA to connect to the definity. The IP address was wrong and was pointing her to her sun systems. I did a list node-names from the Definity and found the correct IP address, however the port information is incorrect. How do I find out which port to use? Is it always 23?

 

[wildcard100001]

do a " display ip-services " on the command line. Look in the port column for the port information on the clan you have enabled for service type "SAT"

Thanks,

Wildcard

 

[lopes1211]

display ip-service" to find what port was setup. It wont be port 23.

-CL

 

[Kn1ght]

thanks fellas, disp ip-serv worked showed the port, I input into ASA and connected properly