ASA disconnects!

[BIS]

Hello boys and girls,

I am having trouble keeping ASA connected, seems to disconnect every 10, 15 minutes if I don't use it. Connected via ip, and using the terminal emulator (4410).
From the connection properties - advanced, I have the Timeout(ms) set to 40000 and the Idle disconnect (secs) set to 0. Still it disconnects afetr approx. 10 minutes. Any ideas?

 

[lever]

Hi BIS,

When you log into the PBX via ASA, you have to enter, (yours may be slightly diffrent)
PASSWORD <enter>
1>;IT0 <enter>
o.k
1>;ME, <enter>
o.k
Login:xxxxxxxxxx
Password:xxxxxxxxxx

The ;IT0 means that it shouldn't time out, you should stay connected. You may get the Login promt after some time though, for security reasons i guess. you can change it to say ;IT30 which means it will stay connected for 30 mins.

Hope this helps.

lever.

 

[BIS]

hmm, thats a good beginning. i normally set up ASA to log in automatically. when I try to set it to log in manually, i don't get these optioins.... any idea why?

 

[scottyjohn]

The commands you mention only relate to logging in to the SAT through the tracker lever, you wouldnt enter any of those parameters when logging in via IP. I havent ever setup ASA to log in via IP so I cant help any further Im afraid. John
ski_69@hotmail.com

 

[MKU]

Hi BIS,

Seems to me this is just a normal time-out in ASA. You can alter this by opening (in ASA) the system properties of the PABX (right-click or ALT+enter). The select the connection, then select the properties the connection, there you can alter the time-out settings.


Cheers,

MKU