Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

as5300 overloade

Status
Not open for further replies.

artaahouraei

Technical User
Jun 19, 2006
10
0
0
IR
dear friends
i have problem with As5300 with 8 e1 ,the problem is when the 240 users are connected. by this i mean when all of E1 are fulled , overload happens.there is no nat command or even access-list either any commands which raise the cpu proccessing ,
furthure more the feature of my As5300 is: memory:128 mb and flash:16
i've changed the ios too but any changes happened
could anyone helps me to decrease the cpu processing by any command.

i look forward to hearing from you
thanks
Arta
 
do you have cef or route-caching enabled??

look to see what process is using up the cpu as well.
 
thanks for reply .the following configuration has been set in my as5300:
KrNet300#sh run
Building configuration...

Current configuration : 4275 bytes
!
version 12.3
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname KrNet300
!
boot system flash c5300-i-mz.123-1a.bin
no logging console
logging monitor errors
enable secret 5 $1$zP/j$tZrZX0lI..nx3wPx00/b90
enable password 7 01140E0B570E010720025D01180912150A
!
username lohrabian privilege 15 password 7 070B330242061117161002
spe 1/0 2/9
firmware location system:/ucode/mica_port_firmware
!
!
resource-pool disable
!
aaa new-model
aaa session-mib disconnect
!
!
aaa authentication login telnet-login line
aaa authentication ppp default local group radius
aaa authorization network default group radius
aaa accounting update periodic 1
aaa accounting network default start-stop group radius
aaa session-id common
ip subnet-zero
no ip icmp rate-limit unreachable
ip rcmd remote-host easyispadm 217.219.219.133 easyispadm enable
ip rcmd remote-host EASYISPADM 217.219.219.133 EASYISPADM enable
ip name-server 217.218.127.105
ip name-server 217.218.155.105
ip name-server 192.9.9.3
ip name-server 217.219.213.2
!
isdn switch-type primary-net5
!
!
!
controller E1 0
clock source line primary
pri-group timeslots 1-31
!
controller E1 1
clock source line secondary 1
pri-group timeslots 1-31
!
controller E1 2
clock source line secondary 2
pri-group timeslots 1-31
!
controller E1 3
clock source line secondary 3
pri-group timeslots 1-31
!
controller E1 4
clock source line secondary 4
pri-group timeslots 1-31
!
controller E1 5
clock source line secondary 5
!
controller E1 6
clock source line secondary 6
!
controller E1 7
clock source line secondary 7
!
!
interface Ethernet0
ip address 10.10.10.1 255.255.255.0
no ip unreachables
ip route-cache flow
shutdown
no cdp enable
!
interface Serial0
ip unnumbered FastEthernet0
encapsulation ppp
shutdown
clockrate 2015232
no fair-queue
!
interface Serial1
no ip address
shutdown
clockrate 2015232
no fair-queue
no cdp enable
!
interface Serial2
no ip address
shutdown
clockrate 2015232
no fair-queue
no cdp enable
!
interface Serial3
no ip address
shutdown
clockrate 2015232
no fair-queue
no cdp enable
!
interface Serial0:15
ip unnumbered FastEthernet0
encapsulation ppp
isdn switch-type primary-net5
isdn incoming-voice modem
no peer default ip address
no cdp enable
!
interface Serial1:15
ip unnumbered FastEthernet0
encapsulation ppp
isdn switch-type primary-net5
isdn incoming-voice modem
no peer default ip address
no cdp enable
!
interface Serial2:15
ip unnumbered FastEthernet0
encapsulation ppp
isdn switch-type primary-net5
isdn incoming-voice modem
no peer default ip address
no cdp enable
!
interface Serial3:15
ip unnumbered FastEthernet0
encapsulation ppp
isdn switch-type primary-net5
isdn incoming-voice modem
no peer default ip address
no cdp enable
!
interface Serial4:15
ip unnumbered FastEthernet0
encapsulation ppp
isdn switch-type primary-net5
isdn incoming-voice modem
no peer default ip address
no cdp enable
!
interface FastEthernet0
ip address 85.185.251.2 255.255.255.224 secondary
ip address 217.219.219.130 255.255.255.128
duplex half
speed 100
no cdp enable
!
interface Group-Async1
ip unnumbered FastEthernet0
no ip unreachables
encapsulation ppp
ip tcp header-compression
no ip mroute-cache
async mode interactive
peer default ip address pool pool1 pool2
no keepalive
compress mppc
ppp authentication pap
group-range 1 240
!
ip local pool pool1 217.219.219.143 217.219.219.254
ip local pool pool2 85.185.251.3 85.185.251.30
ip classless
ip route 0.0.0.0 0.0.0.0 FastEthernet0 217.219.219.129
ip http server
!
!
access-list 115 permit ip any any
no cdp run
snmp-server community asghartaraghe RW 15
snmp-server enable traps tty
radius-server host 217.219.219.133 auth-port 1812 acct-port 1813
radius-server retransmit 5
radius-server key 7 101C5C57161F1B190D1E642228
radius-server authorization permit missing Service-Type
!
line con 0
exec-timeout 0 0
logging synchronous
line 1 240
no flush-at-activation
modem Dialin
autocommand ppp
autoselect during-login
autoselect ppp
line aux 0
line vty 0 4
password 7 07082943420C1E0D165C180405262E2329
login authentication telnet-login
!
scheduler interval 1000
facility-alarm detect controller E1 0
!
!
end
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top