If you use AS2000 with win2k and perform a sp upgrade, some times you will not be able to see you tape device after the upgrade. Usually the message is 'this is a shared device on a distributed server' and you will not be able to see your tape device under the device window.
If you see this, try modifying your registry settings as described below.
1. Ensure you have manually disabled your tape device in windows.
2. Stop tape engine
3. Go to regedt32 and select
4. \HKEY_LOCAL_MACHINE\SOFTWARE\ComputerAssociates\ARCserveIT\Base\Tapeengine
5. Select edit and add key
6. Add the following registry switch under the Tapeengine key:
Key: CONFIG
7. under this key add the following value:
Value: EnableSharedDevices
Type: DWORD
Data: 1
8. Now restart the tape engine.
This has the magic effect of making your tape device available again!
Hope this helps...Andy.
If you see this, try modifying your registry settings as described below.
1. Ensure you have manually disabled your tape device in windows.
2. Stop tape engine
3. Go to regedt32 and select
4. \HKEY_LOCAL_MACHINE\SOFTWARE\ComputerAssociates\ARCserveIT\Base\Tapeengine
5. Select edit and add key
6. Add the following registry switch under the Tapeengine key:
Key: CONFIG
7. under this key add the following value:
Value: EnableSharedDevices
Type: DWORD
Data: 1
8. Now restart the tape engine.
This has the magic effect of making your tape device available again!
Hope this helps...Andy.