Ok, not sure if this deals with ARS, but I'm assuming so. I would like to take a specific group of numbers, say ranges 1000-1025 and send them out a specific trunk group (PRI). These numbers share a trunk with other numbers not in same range. I am using a Definity G3 system, S8700 media servers. These numbers are DID. Any ideas?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
ARS Question
- Thread starter indys28
- Start date
Try FRL's Assign the DID range and the PRI a FRL of say 6 Give the rest of the users 7. The 7's will go to all trunks while the 6's will just go to the PRI with the FRL of 6. ALL the other trunks in the house must be 7.
Hope this makes sense
ED
1a2 to ip I seen it all
Hope this makes sense
ED
1a2 to ip I seen it all
- Thread starter
- #3
- Status
Similar threads
