optionsleft
Vendor
Is it possible to use ARS on tie trunk type(IP trunk connected to other system)? AAR works fine but ARS does not.
Thanks
Thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
ARS on tie trunk
- Thread starter optionsleft
- Start date
- Status
Yes, you can use tie trunks, including IP trunks in the ARS. Check your Route Patterns for the proper digit insertion/deletion. Put a trace up on your station (list trace station xxxx) and try to make an ARS call over that Troun Group. You should see the digits dialed and the digits sent.
Kevin
Kevin
- Thread starter
- #3
- Status
