Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ARP Request 1

Status
Not open for further replies.

Netomaniac

Technical User
Jun 8, 2006
64
US
Hi All,

I have a confusion between ,ARP and DHCP, when a computer newly connects to any network, does it use ARP or DHCP to get the IP address for its Ethernet address from the router.

Thanks....

Netomaniac....
 
When you first switch on a device, the NIC automatically sends out (if it is set to DHCP) a DHCP DISC (which is a broadcast address), this request may traverse layer 3 devices if s relay agent is present. All DHCP's on the network respond. The NIC normally chooses the first DHCP response it gets. That DHCP then issues the address and all other relevant information (DNS etc) providing it has been configured correctly.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top