Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ARN went DEAD

Status
Not open for further replies.

arian19

Technical User
Feb 6, 2003
3
MY
Hai, my ARN could not boot up. when I console in via hyperterminal, what I see is all funny codes,unreadable. is this mean the flash card is corrupted.? Is there anyway that i can make it work/recover again. Please help.
 
I assume that it was a fully functional router prior to this?

If so, when did this problem occur?

If the flash card is corrupt, you can either get it replaced via RMA if you have a support contract, or try accessing the files with a hard drive. The flash cards are readable with in a laptop running Win95/98. You could check out the files, see if they are corrupt, and if they are, just delete them, format the card, then put fresh files to the card.

 
Thanks Jynxx. I tried to accesing the flash card via laptop,running win98, but somehow its asking for driver of the flash card. I searched the net but could not get one for this Flash card. The ARN router was running fine prior to breakdown. Is there any sites that I can download those driver for flash card.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top