ARN config

[sb2323]

Hi

This may sound like a dumb question, But how can I view a config in a word format. I have site mananger but I was wondering if the is any other software available. I have heard of some config builder software that alllows you to do this.

Cheers

 

[Jynxx]

1.)Telnet to the router.
2.)Enter into bcc.
3.)Type the following: show config -all -file <filename>
where &quot;filename&quot; is the name of the file that you want to save it as...do not include the <>.
4.)ftp the file locally and open it in notepad or word.

Using the -all switch, will show you every parameter, including system defaults. If you leave that out, then it only displays things that are NOT system default settings.

 

[gman10]

what is bcc? is this a proprietary Nortel issue? I've never heard of it in Cisco?

Thanks GT

 

[xplicit]

BCC is bay command console. It is another type of IOS that runs on bay/Nortel routers.

If you type bcc from the TI you will go into the BCC. From this you can run similar commands to cisco...