Are there any CCIE study group in Queens, NY?

[NetOpsTech]

Are there any CCIE study group in Queens, NY?

I saw a post on groupstudy.com about forming a study group.

Are there any in Queens?

 

[Jsteve]

Me and a friend Of mine are planning to start one in Feb. I have 2x2600, 10x2500, PIX firewall, 1x4000, 1xCat5000 w/RSM, 2xCat3900, 1xCat1900, ISDN Simulator.

My friend has a simular setup and we plan on combining the equiptment when we start.

I line in Jamaica about 5min from JFK.

 

[NetOpsTech]

Keep me posted.

I'm very interested.

 

[Jsteve]

Post your email address, I will keep you update.

 

[hyang]

I'm in Forest Hills...passed R&S and Security lab couple yrs ago. Just starting to study for the voice, if anyone interested in the voice track let me know.

 

[kalwein]

Hi Folks,

I'm in Brooklyn and spend lots of time in Bayside, Queens. I am also looking to join or start a CCIE study group. I have some equipment I've worked in the field a few years and also recently finished a CCNP. I've put together a home lab with equipment purchased on ebay over time, but it needs to be brought up to snuff a bit.

At the moment my home lab has, rack mounted, tested and minimally configured:

6x 4500 Cisco routers --. Running 12.1x code --- tftp booting -- will bring
up to 12.2 spec as soon I figure out which one is most appropriate – Various
interface types- including 1 mod 6 ISDN BRI's

2x 7000 with RSP --- Runs 7500 code levels --- currently
running 12.2 - atm - hssi - fs - e
1x 2600 router with PRI
3x AGS router -- Runs 11.x - with 6s and 6e --- good for
frame relay switch, basic routing – one
or two of them have HSSI
Cat 5000 switch
Cat 2900 switch --- uses Cat 5000 modules
3x Cat 1900 switches
2x Pix 501
Fore Marconi ASX-200BX ATM Switch
2x Cubix Blade Servers = 12 Windows NT workstations, each
running NAI Sniffer, with serial
cables connected to router console
ports. I have a KVM console with
these. These machines run NETOP for
Remote connectivity, though I
could load PCAnywhere easily
enough.

I have some spare parts in the basement, including a 500CS unit, another rack, another pair of Cubix servers, an old DOLCH network general sniffer, spare 4500 level parts, miscellaneous cables, etc, etc. I also have plenty of spare cables, including the back-to-back cables needed to directly connect serial ports for various scenarios.

I have a fairly good technical library. I also have (legit) access to a wide range of Cisco IOS levels, so switching to more current levels is generally not a problem.
My internet connection has a static IP address, which would make it easier to connect to someone else's lab via VPN.

 

[kalwein]

Just adding my email address here in case anyone wants to respond to me regarding my last post. Thanks!

kalwein@mailandnews.com


Also, in response to JSTEVE

I am very interested in possibly working with you and your friend. Please keep me posted as well. Thanks!

 

[Jsteve]

I will let you guys know when we start.

 

[NetOpsTech]

Did anyone start a group?
I'm interested.

 

[Jsteve]

Still working on the MCSE, so I have not started it yet.

my job has been keeping me busy. I will probably start the group in April.

 

[NetOpsTech]

I'm looking to build a CCIE lab.
I have a 1601 w/WICt1, 1604 w/wict1, 1750 w,2 wict1's, 2621 w/2 wict1's.

Can someone make a few suggestion of what I should add to my existing lab to eanble me to study for the ccie. I'm not looking to blow a fortune on new equipment.

I saw on ebay selling a 6 2500 series routers but I don't see I can get them into my existing lab with the interfaces I have now.

 

[geekmafia]

Hi,

Im in brooklyn and studying for my ccnp. I am interested in joining a ccnp study group.

-GEEKMAFIA

 

[Stratagem]

Im in Flushing Queens and interested in participating if anything comes to frutation! I own some 2924-M-XL's,1 2950T, some 2600's, and an old Fasthub 400 if u can believe that so please keep me posted.