Are optiset E telephones compatible with HiPath 1120 TelCenter?

[XKent]

So i have 2 questions:
1)If Optiset E phones could be used as system phones on Hipath 1120 (in basic config w/o any additional cards installed)?
2)if programming could be performed by using this kind of phone?

 

[obtsystems]

They should, they work on the 3350 and 3800.

 

[sbcsu]

Dunno.
Plug one in and try it?

 

[XKent]

We are only planning to buy new one HiPath, so i want to know if we must buy some new OptiPoint phones or it is possible to use those OptiSet phones that we already have...

 

[XKent]

System programming can only be executed using the first slot on an analog extension of the interface (default extension 11) equipped with an analogextension (MF) or on a KS-type system telephone or in the first slot of an optiPoint-type system telephone.

Is OptiSet E standart KS-type system telephone?

 

[hipath0514]

Hi,

Optiset E phones are not supported in HiPath 1100 system. Only Optipoint 500 and Openstage 15T are supported but in order to use this phone you need to install a UpOe card for this to work.

Hope this answers your quesry


Thanks