ARD 2616 with analog phone

[tekbrian]

we have 3 separate emergency "war rooms" per say. I have 1 500 phone and 1 2616 phone in one location if you pick up either one it needs to ring both the 2616 and 500 phones at a different location. My Hot will only ring 1 2616 and not the 500 (analog) phone..I can setup my 2616 to ring 2 500 phones but I can not figure out how Hot will ring the 2616 and a 500 phone at the same time (using same key). Can I do this without setting up a trunk. I've already told the boss it can be done and 6 hours later i'm still stuck...

 

[PERRYPJ]

Are the 2616 and the 500 the same DN

OLD ROLMEN WORKING ON NORTELS AND AVAYA

 

[tekbrian]

No the 2616 is not but the 500 are the same, but as long as it will work I can change the DN's to whatever..this is a big issue, well to me it is..I said it will work and I can't get it with out a trunk..ps. doesnt have to go outside our own PBX

 

[tekbrian]

perry you may have something that i've been just over looking. I need remote access!!! so from a hot 500 shouldn't have an issue ringing a 2616 and a 500 at same time if they have same DN??? I thought I tried that but kept getting call arrangement errors. Maybe I need to have same DN at each location not across the board..I'll try that see what happens..

Thanks, You may here the errors I get...hope not though

 

[tekbrian]

I can easily add another digital phone to the equation but the analog won't ring along with the digitals..help

 

[bhassell2000]

is there a ring generator in the shelf? I guess I need to ask, what kind of system is this?

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[tekbrian]

It's an 81C.