Ok i have Arcserve 12 installed with Disaster Recovery, but for the life of me i cannot get the recovery to go smoothly. I have done a full backup of my server and then run the recovery using the full DR image including drivers and the MSD. After the restore i dont see to have anything in my DHCP scope or even any exchange store. this is really starting to annoy me as i have spent days on it, i have read everything i can find and would be grateful if anyone can shed some light on this for me.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Arcserve 12 DR
- Thread starter chefski
- Start date
davidmichel
Technical User
I have always thought of DR as a quick easy way to get the system back up and running as a system. In other words DR to get the boot volume back. Once that is done I restart to bring it up under the old/original configuration and then go back to ARCserve to restore my data volumes and databases.
The DHCP should come back with the System State restore.
Restore of an Exchange database I don't remember off hand but remember the Exchange Option User Guide detailed it out and so I just followed that.
The DHCP should come back with the System State restore.
Restore of an Exchange database I don't remember off hand but remember the Exchange Option User Guide detailed it out and so I just followed that.
- Status
