Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Arcserve 11.1 pauses during starup

Status
Not open for further replies.

vancleb

MIS
Jan 20, 2006
12
US
I have a bunch of servers that run Brightstor / Arcserve for NetWare. O/S is NW6.5 and Arcserve is 11.1. At one of the sites, when Arcserve loads, it gets to a warning concernning the version of Btrieve and pauses and waits for the enter key to be pressed before entering. I have seen this before but have forgotten the fix. I checked the CAI website but can't find the fix there anymore.
Anyone else have the issue and know how to make it ignore warnings when loading?
 
I will have to wait until the server is restarted to get the message, A Novell server, could be some time.
 
Here is entry from CSLOADER.LOG, note the big time gap. I beleive this was when it was waiting for manual intervention to get it to continue to load.
---------------------------------------------------------

Sep-24 16:19:55 E21028 Warning - BrightStor ARCserve will load with
following warning(s)
Sep-24 16:19:56 PFC: Recommended Btrieve CacheSize is (20%) of system
Sep-24 16:19:56 memory in order for BrightStor ARCserve to maintain
Sep-24 16:19:57 a stable database.
Sep-24 16:19:57
Sep-24 16:19:58 BrightStor ARCserve server has valid job queue and queue
user
Sep-24 16:20:31 PFC: Information is saved to file
NW65/SYS:\ARCSERVE\PFC.LOG
Sep-24 16:20:31 PFC: Server Configuration passed with Warnings!
Sep-24 16:20:34
Sep-24 16:20:35 Loading SYS:\ARCserve\NLM\CSDBAPIB.NLM
Sep-24 16:20:35 ARCserve Database API (Build 753.000 06/21/04)
Sep-24 16:20:35 ARCserve Database API is loaded
Sep-24 16:20:36 r11.10 June 21, 2004
Sep-24 16:20:39
Sep-24 16:20:40 Loading SYS:\SYSTEM\DSAPI.NLM
Sep-26 19:52:51 [DSAPI.NLM] is ALREADY loaded.
Sep-26 19:52:51
Sep-26 19:52:52
Sep-26 19:52:52
Sep-26 19:52:53 Loading SYS:\ARCSERVE\NLM\CANWPABD.NLM
 
That warning comes up on every server no matter what and does not delay loading.

The problem seems to be loading dsapi.nlm - a Novell module which seems to take time to realise it's already loaded.

Although I haven't be actively involved in NetWare for a couple of years now, I'd venture from a quick google search there are many documented problems related to dsapi and clib.

You can also try updating your ARCserve installation to SP2:


It may or may not help, but you will be on the latest version then.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top