App server web management fails after power fail

[VinylDave]

Hi All,
I have an app server running off an ip500v2 v11. customer had a power fail and the hyperV server lost a disk. Backups were successful however had to fsck the disk as it would not start up properly. All is working, voicemail pro, media manager but I don't have access to any of the web services. I can get to https://myserver.domain.com but not to anything on 7070 or 7071, not available. netstat -anot shows web port 443 in use but I don't see 7070 or 7071. What services do I need to check for this does anyone know? I have service httpd restart already but to no avail.
thanks
dave

 

[VinylDave]

Ok, so in my case tomcat failed to start. /opt/Avaya/apache-tomcat/bin you will find startup.sh. run that, sh startup.sh, starts tomcat apache server. I was still getting a 404 on my web server so I ran these commands, including for media manager.
service WebManager status
service WebManager restart
service mediamanager status
service mediamanager start

Hope that helps someone in the same situation.

 

[VinylDave]

there's a list of scripts in the /etc/init.d/ folder that you can start and stop

 

[derfloh]

Check webcontrol as well