Hi everyone. I recently deployed an App server in hyper v at the latest release R11.0.4.2, the issue I’m having is when I putty into the server and try to elevate to root, my root credentials do not work. I know they’re right because I can change them in web manager port 7071. Any ideas?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
App Server R11.0.4.2
- Thread starter Jonjr88
- Start date
I think someone made a comment similar to this?
However, they said they did an upgrade and it killed the root password. Not deployed.
See if that helps at all
However, they said they did an upgrade and it killed the root password. Not deployed.
See if that helps at all
I talked to Avaya regarding the document SOLN347582 they released but seems they haven't updated it yet.
Personally I think the command should be
If you run the command without -a it will remove you from all other groups, although you get re-added to some of them after a reboot.
"Trying is the first step to failure..." - Homer
Personally I think the command should be
Code:
sudo usermod -a -G wheel AdministratorIf you run the command without -a it will remove you from all other groups, although you get re-added to some of them after a reboot.
"Trying is the first step to failure..." - Homer
- Status