Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

AP1120 Cornet IP and usage of second line

Status
Not open for further replies.

dneis

Technical User
May 8, 2006
42
EU
Hello I have an AP1120 Cornet IP, I have created two extensions :

ADD-SBCSU:642389,OPTI,IP2,1-28-1-239,OPTIIP&API,1&2,14,14,1,1,1,1,0,0,N,0,10,0,,Y
,0,16,Y,,,Y,0,N,N,N,Y,N,,,,,,,,5,,,,N,NORMAL,Y,ENGLISH,0,ALL,,0,TSX,,Y,Y,,Y,,,G71
1PREF,;

ADD-SBCSU:642769,OPTI,IP2,1-28-1-237,OPTIIP&API,1&2,14,14,1,1,1,1,0,0,N,0,10,0,,Y
,0,16,Y,,,Y,0,N,N,N,Y,N,,,,,,,,5,,,,N,NORMAL,Y,ENGLISH,0,ALL,,0,TSX,,Y,Y,,Y,,,G71
1PREF,;

I have set in corNetSystemRegSubscriberNumber :
642389
642769

642389 is working but not 642769... I have the following result...
DISPLAY-SDSU:STATUS=ALL,TYPE=STNO,LEVEL=PER3,STNO=642389;
H500: AMO SDSU STARTED

STATION NUMBER ACCORDING TO PORT EQUIPMENT NUMBER
-------------------------------------------------
MOUNTING LOCATION MODULE NAME BDL BD(#=ACT) STATUS
** .LTG 1.LTU28.001 STMI2HFA A Q2316-X READY
STNO INPUT CCT LINE STNO SI BUS TYPE
642389 239 2497 OPTI CORNET READY
MULTLINE 8. . . . . . . . . . . . . . .READY
001 SUBUNIT . . . . . MAIN SECR READY
(ALT_ROUT: N) (OPTIIP )
LINE: 4661 STNO: 642389 SI: VOICE
001 . . . . . . . . DIGITE SUB A READY
002 . . . . . . . . DIGITE SUB A READY
003 . . . . . . . . DIGITE SUB C READY
004 . . . . . . . . DIGITE SUB A READY
005 . . . . . . . . DIGITE SUB A READY
006 . . . . . . . . DIGITE SUB A READY
007 . . . . . . . . DIGITE SUB A READY
008 . . . . . . . . DIGITE SUB A READY
STNO INPUT CCT LINE STNO SI BUS TYPE
642389 239 2497 OPTI CORNET READY
MULTLINE 8. . . . . . . . . . . . . . .READY
002 ELEM DEV. . . . . DCI TERM DEFIL/TRS/CP
(ALT_ROUT: N) (API )
LINE: 4661 STNO: 642389 SI: DTE

AMO-SDSU -111 STATUS DISPLAY IN SWITCHING UNIT
DISPLAY COMPLETED;


DISPLAY-SDSU:STATUS=ALL,TYPE=STNO,LEVEL=PER3,STNO=642769;
H500: AMO SDSU STARTED

STATION NUMBER ACCORDING TO PORT EQUIPMENT NUMBER
-------------------------------------------------
MOUNTING LOCATION MODULE NAME BDL BD(#=ACT) STATUS
** .LTG 1.LTU28.001 STMI2HFA A Q2316-X READY
STNO INPUT CCT LINE STNO SI BUS TYPE
642769 237 2495 OPTI CORNET READY
MULTLINE 8. . . . . . . . . . . . . . .READY
001 SUBUNIT . . . . . MAIN SECR TRS
(ALT_ROUT: N) (OPTIIP )
LINE: 6567 STNO: 642769 SI: VOICE
001 . . . . . . . . DIGITE SUB A UNACH
002 . . . . . . . . DIGITE SUB A UNACH
003 . . . . . . . . DIGITE SUB C UNACH
004 . . . . . . . . DIGITE SUB A UNACH
005 . . . . . . . . DIGITE SUB A UNACH
006 . . . . . . . . DIGITE SUB A UNACH
007 . . . . . . . . DIGITE SUB A UNACH
008 . . . . . . . . DIGITE SUB A UNACH
STNO INPUT CCT LINE STNO SI BUS TYPE
642769 237 2495 OPTI CORNET READY
MULTLINE 8. . . . . . . . . . . . . . .READY
002 ELEM DEV. . . . . DCI TERM TRS/CP
(ALT_ROUT: N) (API )
LINE: 6567 STNO: 642769 SI: DTE

AMO-SDSU -111 STATUS DISPLAY IN SWITCHING UNIT

even after a restart of the port.... and the AP...

Does someone has an idea?

Thanks a lot for your help!
Denis

 
In fact, in the UME you have to put the HG3530 IP address in the second line too...
Dneis
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top