Anyway if enabling BACKSPACE to work on Succession 3.0?

[hav0k99]

It drives me nuts!!

 

[GHTROUT]

Take a look at "LON" and "LOF" in the manuals. When logged in, your just type LON for Line Mode On - I think that'll give you backspace

~

http://www.GHTROUT.com/

 

[hav0k99]

Do I have to be in a certain load?

 

[GHTROUT]

No load - just at ">"

~

http://www.GHTROUT.com/

 

[hav0k99]

hmmm it did not work

 

[hav0k99]

It didn't work

 

[GHTROUT]

Here is some text from the books:


The Overlay Loader offers a Line Mode interface. With Line Mode enabled (LON), the backspace can be used to edit input. The entered information (responses, for example) is not processed until the <CR> is entered. When the Line Mode is disabled (LOF), the system terminal interface processes information as it is entered. Note:Line Mode interface requires the setting: seven data bits, space parity and one stop bit.The Serial Data Interface (SDI) application on the Multi-Purpose Serial Data Link (MSDL) card offers the Line Mode Editing (LME) function. With the LME function enabled (FUNC=LME), the backspace can be used to edit input. The LME function is only supported on VT200 type terminals running EM200 emulation mode.

~

http://www.GHTROUT.com/

 

[rbtcom]

He might need to use the Delete Key instead

 

[rbtcom]

Try the Delete Key instead of Backspace

 

[johnpoole]

lon works with the delete key, or turn on destructive backspace in procomm

john poole
bellsouth business
columbia,sc