StorageEMC
Technical User
Please let me know anybody know about how to configure VSAN in Cisco MDS switches
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Anybody know about cisco MDS switch(Fabric Switch)
- Thread starter StorageEMC
- Start date
- Status
have you looked through the configuration guides??
I hate all Uppercase... I don't want my groups to seem angry at me all the time! =)
- ColdFlame (vbscript forum)
I hate all Uppercase... I don't want my groups to seem angry at me all the time! =)
- ColdFlame (vbscript forum)
theravager
Technical User
Use the GUI as its pretty effortless, just open device manager. (Could be the devices ip address or could be a little app depending on the firmware version)
FC - VSANS - Create and fill in the details is all it takes.
You can click on the ports and then assign them to that vsan
FC - VSANS - Create and fill in the details is all it takes.
You can click on the ports and then assign them to that vsan
- Status