Anybody can help me?

[iwfly]

I have a router(cisco3620 with nm-2e2w),and it works about 4 hours later,then it will not work.So I put the error report here as shown:

%OIRINT: OIR Event has occurred oir_ctrl 1000 oir_stat EFEF

%OIRINT: OIR Event has occurred oir_ctrl 1000 oir_stat EFEE

%ERR-1-GT64010: Fatal error, PCI Master abort
cause=0x0120E483, mask=0x0CD01F00, real_cause=0x00000400
bus_err_high=0x00000000, bus_err_low=0x31800000, addr_decode_err=0x14000470

 

[dulem]

Look at this link

http://www.cisco.com/warp/public/108/hwts_3600_17963.html#%OIRINT

It seems that you have hardware problem
Regards

 

[writemem]

%OIRINT:
%OIRINT: OIR Event has occurred oir_ctrl 50 oir_stat 4F4C


If this error message appears in the router log, it may signal that there is a possible hardware issue with either a power supply connector, a mis-seated network module, a bad network module, or a bad chassis slot.

sounds like a hardware issue to me. have you tried reseating all boards on the router?

 

[iwfly]

I think it is not a hardware problem,because I can see cdp neightber.