Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

any way to SCROLL through sys speed dials ? 1

Status
Not open for further replies.

randyvegas

IS-IT--Management
Nov 24, 2007
47
US
I inherited a system at a small Dr's office, and they want to be able to hit a button to "scroll" or search through the sys speed dials, and then just select to dial. Is there any slick ways any of you gents have come up with to do such a thing ? It's a CICS with a Callpilot 100 attached. Didn't note the firmware version of the CICS..

If there isn't a way to do it, what would be the logical upgrade for them to be able to do it ? What about upgrading to BCM?

thanks!
 
No
Ip office you can set a contact list on each phone and scroll through

You can do it with aastra phones on our hosted platform, also

I'm trying to recall if the 11xx sets have this function

ddcommllc.com
Avaya/Toshiba/SyntelSolutions

ACIS

"Will work for stars
 
What would be a good replacement system to offer ? Needs aren't much..

4 analog CO's
7 phones
Voicemail (for after hours ... not for users)
central dialing directory
bluetooth / wireless for attendant

He's not wired for IP phones, currently..

thanks
 
Avaya ip office, 14xx phones have the contact directory and they are digital



ddcommllc.com
Avaya/Toshiba/SyntelSolutions

ACIS

"Will work for stars
 
Can the 14xx phones and IP office be connected to existing wiring (single pair per set) ? or does it require cat5 network ?..

phones look nice. If I can put it into their current wiring it might be an option!

THANKS!
 
single pair

ddcommllc.com
Avaya/Toshiba/SyntelSolutions

ACIS

"Will work for stars
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top