Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Any big issues with SAV 9.0.6?

Status
Not open for further replies.

coveyite

IS-IT--Management
Oct 17, 2007
5
US
Because of a serious issue with 10.1, we need to roll back our clients to 9.x until time proves whether 10.1.7 is stable. I'm debating whether to go back to 9.0.1.1100, which seemed to run fine for our users, or to go to 9.0.6. Any feedback out there?
 
Out of curiosity what is the serious issue you encountered? I have been starting to prepare to deploy it in my environment.
 
Mapped drives will show as "disconnected". A Microsoft knowlegebase article claimed that SAV was the culprit, starting in version 10. A Symnatec tech support agent confirmed a fix in 10.1.6 MP1, thus also rolled up in 10.1.7; however, I just did some further testing with a user having the issue and it still occurred in 10.1.7, yet this time the application using the mapped drive would work with that drive despite is showing as "disconnected" under My Computer. I then removed 10.1 and put 9.0.1.1100 on and the same disconnected status shows. Still doing some research (removed SAV altogether).
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top