Ani server 4.0 - Lan Management Solution 2.0

[Xelha]

Dear Friends,

I have also problems with the Ani server. But in my case it works somtimes fine, but most of the time it doesn't work. I have mainly the following problems:

1). I can connect to the Aniserver via Campus Manager. Ie Topology Services. But I cannot make any changes in SNMP settings and Discovery settings via the Server Configuration section. The system tells me that the ANI server is not running. And In: About Ani Server -> Devices Support, I also get a problem. The devices are not shown. The systems says that there is a problem with the ANI server.

2.) The same as above. But I cannot connect to AniServer via Campus Manager too. In other words: I cannot connect to ANI in any kind.

In both case the process manager gives no faults.

Can anybody help???

Thanks a lot!

Kind regards,

Harry Gorter
The Netherlands

 

[mart1n]

Try this link if you have a CCO login:

http://www.cisco.com/warp/customer/477/UT/connect-19000.html

Remember that ANI relies on being able to resolve its own server DNS name, so check your /etc/hosts- as it says in the Cisco tip:

Verify that your first entry in the file, /etc/hosts, is the actual IP address and hostname of the CiscoWorks server machine and not the loopback address 127.0.0.1. The actual IP address or hostname is the address you put in the URL locator to connect to CiscoWorks through the browser.


Martin

 

[Xelha]

Dear Martin,

Thanks for your help!

I made the modifications to the hosts file already in an earlier stage. But this was not the solution to the problems.

Do you have other suggestions?

Kind regards,

Harry