ANI Data

[zardari42]

Hi, I got a preinstalled switch having rls 5.0, CS1000M, below is the ANI data of that switch.

ANI_DATA
ANAT 111
ANLD 1111

I need help to understand what is ANAT/ANLD prompt for? and what value/digit should be use while configuring ANI data.
Thanks

 

[bigindian65]

What you have there looks like Nortel Default. What it is for - BN Billing Number. Mine has the NXX & DN of our main number, which is, of course our billing number telephone account.

Mato' Was'aka

 

[Avaya911PLM]

Actually, there is no "nortel Defult' for these settings, but that is the common datafill most techs put in

--
Fletch

Nortel Emergency Services PLM

http://nortel.com/e911

Check out this month's E911 Talk podcast at Nortel E911 Talk Podcast

 

[zardari42]

I mean it doesnt impact have impact on PBX?? i can set any value here???

 

[bigindian65]

I don't think so, could be wrong, I still think you should put your main number in there. btw - anat - attendant billing number ANLD listing directory number.

Mato' Was'aka

 

[jamie2]

I have always set mine up the way BigIndian does with the main billing number.