Analogue Trunk Destination

[thepfy]

I may need to move the an analogue trunk line from our DX to our Openscape 4K.
(I have spare capacity on a TM2LP card and the line is loop start).
The line is used as the main incoming number from one of our services.

How would I configure the system to send the calls to a particular destination?
To complicate matters further the destination isn't on the Openscape...

Any ideas?

 

[Moriendi]

You use DGTPR "digit prefix" in the TACSU line to send the call to a valid digit result on the 4K. From there you either route as normal or forward the call.

 

[thepfy]

Thanks