Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Analogs Telephone have busy tone

Status
Not open for further replies.

casp1616

Technical User
Dec 2, 2009
10
VE
Hi, everyone
I need some help here, I don´t have expertice in MD110 PBX, but I have an issue that is some analogs telephone work fine, they receive calls ok, but at the moment for doing a call, the phone is busy, so I can´t do anything. I checked the board with WINFIOL, and I restarted and it does, although with the same result. Other thing is that it doesn´t have any alarm and I extracted and inserted the board and nothing. So What can I do?

I expect that you can help me... Thanks and greetings...
 
please post the printout of following command:

SUSIP:DIR=XXX;

where XXX is your extension number

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
 
If it's a number of phones, are they all in the same LIM? If so, it could be keycode receiver congestion/ TMU Fault.
 
Some of your telephone lines can have ground because of bad cable. first check them. and ?f you have spexi extention check their lines if groud correct them. Than restart tmu board if you still have the same faulth replace the TMU.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top