Analog Trunks

[jsfranco33]

How do you determine what extension an Analog Trunk will ring to? I have attached the print out of the trunk.

ES
TN 004 0 01 06
TYPE COT
CDEN 8D
CUST 0
XTRK XUT
TIMP 600
BIMP 3COM
TRK ANLG
NCOS 4
RTMB 0 5
NGRP 1
SIGL GRD
SUPN YES
STYP PSP
AST NO
IAPG 0
CLS UNR DTN CND ECD WTA LPR APN THFD SPCD
P10 NTC
TKID
AACR NO
DATE NO DATE

 

[trvlr1]

Look in your documentation for ATDN. If you want to send incoming calls to a specific DN that is the way to do it.

 

[jsfranco33]

I never get that prompt...

 

[trvlr1]

you need to have auto set to yes in LD 16 I think it is ....

 

[johnpoole]

you will need to out the trunks, then either change auto to yes or out the rdb and put it back in.. then when you put the trunks back in each one will give you the atdn prompt..

ld 14
out 12 or new 12 will buildor out 12 trunks on sequential tn;s

john poole
bellsouth business
columbia,sc