(Analog Trunks) BCM to BCM

[deejaychoice]

Gents - Has anyone had any luck trunking the 2 devices, If so please share the wealth of knowledge.

Current Setup

1 BCM50r3 DN's - 2XXX
1 BCM450r1 DB's - 3XXX
Licences Applied on both systems - check/configured
Routes & Destinations Codes / Line pools - check/configured

I am trying to firgure out if these trunks need some special setting's or treatment - the bcm do no see the calls

Note -
SIP to SIP works fine

any ideas would be useful thanks!

 

[deejaychoice]

Just in case -
NOTE:
Both systems are facilitated with analog devises i.e. ATA breakouts and ATM MBM

 

[hawks]

Do you have the ATA of 1 going to the Analog Trunk Port of the other?

 

[deejaychoice]

Correct Analog trunks are connected to analog trunks.

 

[gberger]

You mean analog trunks connected to analog station ports..
What exactly are you trying to achieve if you allready have SIP trunks between your 2 bcm's?

 

[hawks]

You can not connect Trunk to Trunk with the Analog Trunks. You need to come off the other side Analog Station port like gberger said.

 

[deejaychoice]

Noted, Thanks guys.

Ploted it out and sure thing an Analog trunk Should be pluged into and analog station.