Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

analog trunk transfers and conference

Status
Not open for further replies.

coolfalcon

Technical User
May 17, 2011
59
JO
Dear all;
i have a problem with our Mxone 6.0 system , i have two analog trunks , if i make two outgoing calls by a digital or operator extension
if i join the two trunks on conference or make a transfer , the two called parities hear a big noise like the sound of modems , and they have a very weak voice call in the background of the noise ,
here are the settings of the routes and parameters
MDSH> rocap:rou=44;
ROUTE CATEGORY DATA
ROU CUST SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
44 0110000000000010 4 2100000000 0 30 128 00151515 411111000000 001100

END

MDSH> rodap:rou=44;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
44 TL11 H'00000022 H'00000009 H'000020D5 NO

END

MDSH> roddp:dest=83;
EXTERNAL DESTINATION ROUTE DATA
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
83 44 0005000000000250000000000000 0 3

thanks alot in advance
 
hi
tri this one
ROCAI:ROU=44,SEL=0110000000000010,SIG=100010000000,TRAF=00151515,TRM=4,SERV=2000000000,DIST=30,DISL=128,NODG=0,BCAP=001100;
RODAI:ROU=44,TYPE=TL11,VARI=00010188,VARO=00002815,VARC=00031012,FILTER=NO;
roeqi:equ=x.x.x.x,tru=x.;
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top