Analog to sip passthru

[baldwincl]

I have an analog line coming into a IPO500 that i want to pass thru to an extension off of sip trunk. i can call this extension from a phone but i have an inbound call route to my analog destination as 61685 however i get the following when i call the line

5608794mS CMLineRx: v=1
CMSetup
Line: type=AnalogueLine 1 Call: lid=1 id=2 in=1
Called[] Type=Unknown (0) Reason=CMDRdirect SndComp Calling[] Type=Unknown Plan=Unknown Pres=NAInterworking (2)
BC: CMTC=Speech CMTM=Circuit CMTR=64 CMST=Default CMU1=ULaw
BChan: slot=1 chan=1
IE CMIEDeviceDetail (231) LOCALE=enu HW=8 VER=4 class=CMDeviceAlogTrunk type=0 number=1 channel=0 rx_gain=32 tx_gain=32 ep_callid=2 ipaddr=10.10.100.101 apps=0
5608794mS CD: CALL: 1.2.1 BState=Idle Cut=1 Music=0.0 Aend="Line 1" (1.1) Bend="" [] (0.0) CalledNum= () CallingNum= () Internal=0 Time=4 AState=Idle
5608795mS CMCallEvt: 1.2.1 34 Alog Trunk:1: StateChange: END=A CMCSIdle->CMCSDialInitiated
5608795mS CMTARGET: 1.2.1 34 Alog Trunk:1: LOOKUP CALL ROUTE: type=0 called_party= sub= calling= dir=in complete=1 ses=0
5608795mS CMTARGET: 1.2.1 34 Alog Trunk:1: SET BESTMATCH: length 0 vs -173938820 match= dest=61685
5608795mS CMCallEvt: Priority hike: call 34 priority 0->1
5608795mS CMTARGET: 1.2.1 34 Alog Trunk:1: LOOKUP ICR: DDI= CGPN= (Destination 61685 ) => CDPN=61685
5608796mS CMTARGET: 1.2.1 34 Alog Trunk:1: ADD TARGET (N): number=61685 type=0 depth=1 nobar=1 setorig=1 ses=0
5608796mS CMTARGET: 1.2.1 34 Alog Trunk:1: SYS SC: 61685 3 1685 sc=type=Dial code=6N;, num=N"@10.20.12.25" callinfop->sending_complete=1 secondary_dialtone=
5608797mS CMARS: CMARSHandler::FindActiveARSByGroupID GroupID=4
5608797mS CMLRQ: CMLRQHandler::FindActiveLRQByGroupID GroupID=4
5608797mS CMTARGET: Group Id: 4 has NOT been found in Line: 5
5608797mS CMTARGET: Problem with Line Id: 17, Unlicenced -1, NewCallResourceCheck( ) -1
5608797mS SipDebugInfo: SIPTrunks: Make Target voip, line group id is 4 and ip 10.20.12.25
5608798mS CMMap: a=6.1 b=0.0 Mapper::AllocateCodec allocated CMRTVocoder resource busy 1, total 4
5608798mS SipDebugInfo: License, Valid 1, Available 1, Consumed 0
5608798mS CMCallEvt: 0.1119.0 -1 BaseEP: NEW CMEndpoint f55fee30 TOTAL NOW=3 CALL_LIST=1
5608799mS PRN: Created MH f561c3b0 parent 0.1119.0 -1 SIPTrunk Endpoint
5608801mS CMTARGET: DIAL LINE: 34 GROUP = 4 SUCCESS = f55fee30
5608802mS CMTARGET: 1.2.1 34 Alog Trunk:1: INITIAL TARGETING SUCCEEDED
5608802mS CMTARGET: 1.2.1 34 Alog Trunk:1: GetNoAnswerTimer:15
5608802mS CMCallEvt: 1.2.1 34 Alog Trunk:1: StateChange: END=A CMCSDialInitiated->CMCSDialled
5608803mS CMLineTx: v=1
CMProceeding
Line: type=AnalogueLine 1 Call: lid=1 id=2 in=1
5608803mS CMCallEvt: 0.1118.0 34 TargetingEP: StateChange: END=B CMCSIdle->CMCSOffering
5608804mS CMCallEvt: 19.1119.0 34 SIPTrunk Endpoint: StateChange: END=T CMCSIdle->CMCSOffering
5608805mS CMLineTx: v=0
CMSetup
Line: type=IPLine 19 Call: lid=19 id=1119 in=0
Called[1685@10.20.12.25] Type=Unknown (0) Reason=CMDRdirect SndComp Calling[] Type=Unknown Plan=Unknown Pres=NAInterworking (2)
BC: CMTC=Speech CMTM=Circuit CMTR=64 CMST=Default CMU1=ULaw
BChan: slot=1 chan=1
IE CMIEDeviceDetail (231) LOCALE=enu HW=8 VER=4 class=CMDeviceAlogTrunk type=0 number=1 channel=0 rx_gain=32 tx_gain=32 ep_callid=2 ipaddr=10.10.100.101 apps=0
IE CMIEIcrPriorityDetail (239) Priority = 1
IE CMIEMohSourceId (247) MOH Source = 1
IE CMIERespondingPartyNumber (230)(P:2 S:100 T:0 N:0 R:4) number=
IE CMIEFastStartInfoData (6)
Display [??>1685]
Timed: 30/01/09 17:13
Locale: enu
5608806mS SipDebugInfo: 19.1119.0 34 SIPTrunk Endpoint(f55fee30) received CMSetup
5608806mS SipDebugInfo: 19.1119.0 34 SIPTrunk Endpoint(f55fe20c) CMSetup received, ep f55ffee8, dialog f55fe20c, dialling 1685@10.20.12.25
5608806mS SipDebugInfo: 19.1119.0 34 SIPTrunk Endpoint(f55fe20c) Cannot assign a calling party, call won't proceed


Im assuming I need to assign the "FROM" field somewhere.
Any ideas out there?

Thanks!

"So this is how liberty dies. With thunderous applause.

 

[baldwincl]

issue fixed. i made a user for every extension on the far side (only 6 extensions) however i am sure there is a more efficient way to do this.

It would also be nice to be able to pass thru the caller ID. It would also nice to have a pony to ride home from work but i just dont see myself ever owning a pony either.

"So this is how liberty dies. With thunderous applause.

 

[IPOfficeIreland]

the ipo justs need to validate the uri so you did it by creating a user and in the sip tab the incoming uri was validated.

you could have just create extra uris in SIP trunk.