Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

analog soundatation2 polycom conference

Status
Not open for further replies.

godslavesmith

Technical User
Mar 12, 2009
90
SA
hello gents

i have an analog soundstation2 polycom connected to our bcm400 , but the problem is in the conference feature ,
we are unable to make a conference in this device ,
we followed what mentioned in the manual perfectly but no use ...

if any one can help i'll be appreciated .
 
Hi,

You will need to porvide some more details. Can you give us the steps you are using and we can work from there.
 
1- i make the first call
2- flash 3
3- combination button
4- second call
5- combination button
 
If its a BCM a 4.0 you will need to press:
- make your call
- flash *807 to draw second dial tone (this puts the caller on hold)
- flash *3 to join the parties.
If its a lower version Flash *2 and Flash *3 should do it.
 
Your welcome.

We strive to help out people in need here... and believe me I learn new tricks daily about the system too, and have been working with the product for awhile.
 
good luck

keep up the good deed's owner will not be forgettable .
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top