Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Analog PSTN lines simulator for Lab

Status
Not open for further replies.

dpsguard

Technical User
Nov 29, 2007
19
CA
Hello All,

For programming and testing UCX in lab with an analog FXO card in it, can we use a 2 or 4 port ATA with FXS ports on it? Essentially any cost effective method to simulate a PSTN environment is what I am looking for. Thanks so much in advance.
 
Yes, that should work fine. Another option would be to get a line simulator such as a Teltone TLS-5 which has 5 FXS ports, and programmable number plan and Caller-ID Name.
 
Thank you so much for confirmation that ATA can be used. I looked at Ebay for Teltone and it is bit expensive for my needs. So I will go with a 2 port ATA to test.

Appreciate again your help.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top