Analog Devices, fax machines in particular

[DDTECK]

Two IPO's networked via point to point in the US. I have a fax machine using a station port off one of the IP Offices and assigned a DID. The DID is from the PRI at the other end of the network. So when I go to fax out I go over the network, get dial tone and then can not complete the transaction. I place an analog phone on the same connection call goes through no problem. Thoughts?

 

[mattKnight]

You need to enable Fax support on the IP lines.



Take Care

Matt
If at first you don't succeed, skydiving is not for you.

 

[DDTECK]

through our provider? or is this a programming step in the IPO?

 

[gknight1]

should be on the IP Line you created.