Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Analog clip for MX-One

Status
Not open for further replies.

aau2

Technical User
Nov 12, 2004
163
ES
Hi, I have a TSW 3.0 , and I want to config a analog extenssion with clip, but I don't know what parametes I have to config.

Thanks
 
there is a PARAMETER ICAT in EXTEI - by default is 00000 - make it 80000 - and u have clip - also check LIDAP!!
 
In MX-One the default ICAT is 0000000, what would be the digit to change to 8?

 
if D1 is 8 this will enable CLIP or not
D5 controls signalling (FSK,DTM)
D6 controls when the CLIP is sent
D7 enables ASCII character filter or not

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
 
System is MX-one TSW sp3

Is it neccessary having the following license for CLIP in analogue extension?
ANALOGUE-EXTENSION-CLIP FAL1046191
Is CLIP supported from ELU29?
If yes which of the two: FSK or DTMF?

Thank you

 
Is it neccessary having the following license for CLIP in analogue extension?

yes

Is CLIP supported from ELU29?

no, but there exists a special prom which should enable this functionality. officially it is only supported on ELU34

If yes which of the two: FSK or DTMF?
don't know

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
 
I can't config ICAT with 8000000. Which could be the problem?
 
aau2,

there's no such thing as TSW 3.0 so...

if you have Telephony server (TSE)

please post: ts_about and license_status


if you have Telephony switch (TSW aka BC13)

please post: CADAP; and LIDAP;



-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
 
Hi it's a Telephony Server, and the pirnts are the next.

MDSH> ts_about
====== MX-ONE Telephony System ======
Version: 0.31.38 build2

RPM Packages
============
Telephony Server 11.38 :
eri_sn-11.38-MR

Media Gateway File system 2.0 :
egx_rfs-2.0-1

Media Gateway 9.17 :
egx_sw-9.17-1

Media Gateway Classic 1.3 :
lsue_sw-1.3-1

Manager 7.29 :
eri_om-7.29-1

MDSH> license_status
Status on hardware id: 0017a4-112226

Current, or last used, sequence number of license file: 0
Licenced to hardware id 000000-000000
License file sequence number 0 with age 1153 hours.

Port licences:
==============

Tag Trial time Allowed Used
============================== ============ ========== ==========
ACD-AGENT 1440 0 0
ANALOGUE-EXTENSION 1440 0 1
ANALOGUE-EXTENSION-CLIP 1440 0 0
APP-LINK-INTERFACE 1440 0 1
BASE-STATION-DECT 1440 0 0
CAS-EXTENSION 1440 0 0
CCM-ETH-INTERFACE 1440 0 0
CORDLESS-EXTENSION 1440 0 0
DIGITAL-EXTENSION 1440 0 0
EM-ETH-INTERFACE 1440 0 0
EXTERNAL-LINE-CAS-ANA 1440 0 0
EXTERNAL-LINE-CAS-DIG 1440 0 0
EXTERNAL-LINE-CCSS7 1440 0 0
EXTERNAL-LINE-DASS 1440 0 0
EXTERNAL-LINE-DPNSS 1440 0 0
EXTERNAL-LINE-H323 1440 0 21
EXTERNAL-LINE-H323-SERV 1440 0 21
EXTERNAL-LINE-ISDN-NET 1440 0 0
EXTERNAL-LINE-ISDN-USR 1440 0 0
EXTERNAL-LINE-QSIG 1440 0 30
EXTERNAL-LINE-SIP 1440 0 2
FIXED-REMOTE-EXTENSION 1440 0 0
FREESEATING 1440 0 0
GENERIC-EXT-SMS 1440 0 0
IP-EXTENSION 1440 0 14
IS-ETH-INTERFACE 1440 0 0
ISDN-TERMINAL-INTERFACE 1440 0 0
LINE-INTERFACE-MODULE 1440 0 0
MOBILE-EXTENSION 1440 0 0
OPERATOR-EXTENSION 1440 0 0
PAGING-LOOP 1440 0 0
PAGING-PARALLEL 1440 0 0
PAGING-SERIAL 1440 0 0
PERSONAL-NUMBER-USER 1440 0 2
REPEAT-IND-DIV-USER 1440 0 2
RVA-INTERNAL 1440 0 0
SMDR-ETH-INTERFACE 1440 0 0
VCU-FAX-III-PORT 1440 0 0
VM-ETH-INTERFACE 1440 0 0
VOIP-ETH-INTERFACE 1440 0 0


System licences:
================

Tag Trial time Allowed
============================== ============ ==========
ANCD-FEATURE 1440 no
DISA-NUMBER 1440 no
HOSPITALITY-APPLICATION 1440 no
LICENSE-FILE 1440 no
NET-SERVICES 1440 no
ROUTING-SERVER-CLIENT 1440 no
ROUTING-SERVER-SERVER 1440 no
VOIP-SECURITY 1440 no

 
mmm, you don't have the license, but you have trial though.
Are you trying this on ELU29? chances are big that the ICAT change is only accepted for the ELU34.

please post such printouts with monotags [ignore][tt]printout[/tt][/ignore] for better reading.

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
 



MDSH> license_status
Status on hardware id: 0017a4-112226

Current, or last used, sequence number of license file: 0
Licenced to hardware id 000000-000000
License file sequence number 0 with age 1153 hours.

Port licences:
==============

Tag Trial time Allowed Used
============================================================
ACD-AGENT 1440 0 0
ANALOGUE-EXTENSION 1440 0 1
ANALOGUE-EXTENSION-CLIP 1440 0 0
APP-LINK-INTERFACE 1440 0 1
BASE-STATION-DECT 1440 0 0
CAS-EXTENSION 1440 0 0
CCM-ETH-INTERFACE 1440 0 0
CORDLESS-EXTENSION 1440 0 0
DIGITAL-EXTENSION 1440 0 0
EM-ETH-INTERFACE 1440 0 0
EXTERNAL-LINE-CAS-ANA 1440 0 0
EXTERNAL-LINE-CAS-DIG 1440 0 0
EXTERNAL-LINE-CCSS7 1440 0 0
EXTERNAL-LINE-DASS 1440 0 0
EXTERNAL-LINE-DPNSS 1440 0 0
EXTERNAL-LINE-H323 1440 0 21
EXTERNAL-LINE-H323-SERV 1440 0 21
EXTERNAL-LINE-ISDN-NET 1440 0 0
EXTERNAL-LINE-ISDN-USR 1440 0 0
EXTERNAL-LINE-QSIG 1440 0 30
EXTERNAL-LINE-SIP 1440 0 2
FIXED-REMOTE-EXTENSION 1440 0 0
FREESEATING 1440 0 0
GENERIC-EXT-SMS 1440 0 0
IP-EXTENSION 1440 0 14
IS-ETH-INTERFACE 1440 0 0
ISDN-TERMINAL-INTERFACE 1440 0 0
LINE-INTERFACE-MODULE 1440 0 0
MOBILE-EXTENSION 1440 0 0
OPERATOR-EXTENSION 1440 0 0
PAGING-LOOP 1440 0 0
PAGING-PARALLEL 1440 0 0
PAGING-SERIAL 1440 0 0
PERSONAL-NUMBER-USER 1440 0 2
REPEAT-IND-DIV-USER 1440 0 2
RVA-INTERNAL 1440 0 0
SMDR-ETH-INTERFACE 1440 0 0
VCU-FAX-III-PORT 1440 0 0
VM-ETH-INTERFACE 1440 0 0
VOIP-ETH-INTERFACE 1440 0 0
System licences:
Tag Trial time Allowed
====================================================
ANCD-FEATURE 1440 no
DISA-NUMBER 1440 no
HOSPITALITY-APPLICATION 1440 no
LICENSE-FILE 1440 no
NET-SERVICES 1440 no
ROUTING-SERVER-CLIENT 1440 no
ROUTING-SERVER-SERVER 1440 no
VOIP-SECURITY 1440 no



Also the printout of list of boards

MDSH> board_list
Device board position information

Boardpos Brdid Individs Signal State Status
format
1-0-00 6 32 long active assigned
1-0-10 6 32 long active assigned
1-0-20 6 32 long active assigned
1-0-30 6 32 long active assigned
1-0-70 87 4 long active assigned
1-1-00 57 32 long active assigned
1-1-10 57 32 long passive not assigned
1-1-20 57 32 long passive not assigned
1-1-30 57 32 long passive not assigned
1-1-40 57 32 long passive not assigned
1-1-50 57 32 long passive not assigned
1-1-60 57 32 long passive not assigned
1-1-70 57 32 long passive not assigned
1-2-00 114 32 long active assigned
1-2-10 114 32 long active assigned
1-2-20 114 32 long active assigned
1-2-30 114 32 long active assigned
 
Hi i have a question for whosrdaddy regarding special eprom for Elu29 does it have a RYS number? and i want to ask the ELU29 has different index number for each market is a card for market /2 changeble to other market by firmware change or is it an hardware issue?

Best Regards
Lasse
 
If I remember correctly you can change the prom (I think it was for chinese market - but I can be wrong) to enable the functionality. do a forum search, there are some related posts about this subject.

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
 
thanks for quick replay!!! i will do a search on forum regarding clip on elu29 how about the country index is it changable by switching firmware or is it country dependent hardware that sets the index of card?

Lasse
 
there is a FAQ :

faq806-3305

don't know if this helps you further...

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
 
I´ve tested ELU29/11 on TSW SP3 and it provides DTMF CLIP to analogue telephones, i guess it should be the same as TSE 3.1. ICAT parameter is 8000100.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top