Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Analog bridged call appearance goes straight to voicemail.

Status
Not open for further replies.

tfp2006

Programmer
Apr 28, 2006
51
US
tfp2006 (Programmer) 16 Dec 11 13:40
I have a 6408D+ with an analog bridged appearance. When you dial the analog extension it goes straight to voicemail. I get dial tone on the digital set from the bridged appearance.

The coverage path for the analog port is below.


Coverage Path Number: 10
Hunt after Coverage? n
Next Path Number: Linkage

COVERAGE CRITERIA

Station/Group Status Inside Call Outside Call
Active? n n
Busy? y y
Don't Answer? y y Number of Rings: 4
All? n n
DND/SAC/Goto Cover? y y

COVERAGE POINTS

Terminate to Coverage Pts. with Bridged Appearances? n

Point1: h99 Rng: Point2: Point3:
Point4: Point5: Point6:
 
Try changing Terminate to Coverage Pts. with Bridged Apperances? to Y.



Scott
________________________________________
When Life Gives You Questions, Google has Answers - AJ Carpio

 
Also, post a copy of

"stat sta XXXX" (XXXX is the analog extension in question)

and do a list tra XXXX, post it here.
 
Thanks everyone. I was able to fix the issue. It seems I had a few bad analog ports.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top