Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Analog 801,802,803 rings Operator Station

Status
Not open for further replies.

Andrewiski

Technical User
Aug 28, 2009
34
US
My operator station keeps ringing when an analog line has an incomming call even though the line has been assigned to a calling group to ring my fax board. The operators station has not been assigned the lines as private lines and when I lok at the phone programming I don't see any buttons assigned to the pool or lines.

Is there a way to prevent the operators station from ringing on incomming calls, or did I miss something in the setup.

Thanks
Andy
 
Based on what you are telling us " The operators station has not been assigned the lines as private lines........... I don't see any buttons assigned to the pool or lines." this shouldn't be happening.

Exactly how are these lines ringing on the Operator's phone, are they coming in on a button or what??




-merlinmansblog.blogspot.com
 
Thanks for the reply Merlinman. Based on your response analog lines ringing to the operators station is not a "by design" feature so somewhere it must assigned to a button or group. I will keep digging.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top