We just tested this on R10.1 and ** and ## still works on the new FNE codes.
Just to give some background the new FNEs have been requested for years by the Nordic market since we have Mobile Direct Access which causes all mobile calls to route through the PBX first.
The "feature" with getting dialtone when the remote party disconnected was not needed here and just caused annoyance since any new call from the mobile would route through the FNE anyway.
When they informed that they planned to disable the Mobile Call Control feature the GRIP requesters informed that this was never requested and luckily it got changed to release, but seems the release notes never got updated.
This has been updated on the marketingtools website to the following.
FNE 31 = Mobile Call Control This code allows a user called or calling the system to invoke mobile call control and to then handle and make calls as if they were at their system extension.
FNE 32 = Mobile Direct Access Mobile direct access FNE32 immediately redials on switch the DDI digits received with the call rather than returning dial tone and waiting for DTMF digits as with FNE31 .
FNE 33 = Mobile Callback Mobile callback allows the user to call the system and then hang up. The system will then make a call to the user's CLI and when answered, provide them with dial tone from the system to make calls.
FNE 35 = Simplified Mobile Call Control: In addition to the Mobile Call Control feature that enables your mobile to make and handle calls as if your are using your extension, this Simplified Mobile Call Control FNE 35 clears the dial tone when the call recipient ends the call. The dial tone is provided on the mobile phone for fresh calls after the current call is cleared.
FNE 36 = Simplified Mobile Direct Access: In addition to the Mobile Direct Access feature, the Simplified Mobile Direct Access FNE36 clears the dial tone when the call recipient ends the call.
FNE 37 = Simplified Mobile Callback: In addition to the Mobile Callback feature that enables your mobile to get call back from the system and lets you use the dial tone for making and handling calls, this Simplified Mobile Callback FNE 37 clears the dial tone when the call recipient ends the call. The dial tone is provided on the mobile phone for fresh calls after the current call is cleared.
"Trying is the first step to failure..." - Homer
Just to give some background the new FNEs have been requested for years by the Nordic market since we have Mobile Direct Access which causes all mobile calls to route through the PBX first.
The "feature" with getting dialtone when the remote party disconnected was not needed here and just caused annoyance since any new call from the mobile would route through the FNE anyway.
When they informed that they planned to disable the Mobile Call Control feature the GRIP requesters informed that this was never requested and luckily it got changed to release, but seems the release notes never got updated.
This has been updated on the marketingtools website to the following.
FNE 31 = Mobile Call Control This code allows a user called or calling the system to invoke mobile call control and to then handle and make calls as if they were at their system extension.
FNE 32 = Mobile Direct Access Mobile direct access FNE32 immediately redials on switch the DDI digits received with the call rather than returning dial tone and waiting for DTMF digits as with FNE31 .
FNE 33 = Mobile Callback Mobile callback allows the user to call the system and then hang up. The system will then make a call to the user's CLI and when answered, provide them with dial tone from the system to make calls.
FNE 35 = Simplified Mobile Call Control: In addition to the Mobile Call Control feature that enables your mobile to make and handle calls as if your are using your extension, this Simplified Mobile Call Control FNE 35 clears the dial tone when the call recipient ends the call. The dial tone is provided on the mobile phone for fresh calls after the current call is cleared.
FNE 36 = Simplified Mobile Direct Access: In addition to the Mobile Direct Access feature, the Simplified Mobile Direct Access FNE36 clears the dial tone when the call recipient ends the call.
FNE 37 = Simplified Mobile Callback: In addition to the Mobile Callback feature that enables your mobile to get call back from the system and lets you use the dial tone for making and handling calls, this Simplified Mobile Callback FNE 37 clears the dial tone when the call recipient ends the call. The dial tone is provided on the mobile phone for fresh calls after the current call is cleared.
"Trying is the first step to failure..." - Homer
