AML error

[dirkfuzzbucket]

I have a constant error message AMLM024 07 on an OPT 11C Rls 21 v3

To rectify the fault I have gone LD48 stat AML and get no reply just

LNK000
.stat aml
.

Any Ideas how to supress/correct this message.

 

[johnpoole]

go to load 22 prt adan, you'll see an aml that must not be in use, take it out in load 17... if it was needed you would have an app down, mail..etc

john poole
bellsouth business
columbia,sc

 

[dirkfuzzbucket]

John Can't see AML in ADAN (print out below) the only 7 is TTY 7 this is disables and I cant enable it?? (print out Below ADAN data

ADAN HIST
SIZE 50000
USER MTC SCH BUG
ADAN TTY 0
TTY_TYPE SDI
CAB 00
CARD 00
PORT 0
DES MAINT.MODEM
FLOW YES
BCST NO
USER MTC SCH BUG
TTYLOG 0
BANR YES
ADAN TTY 1
TTY_TYPE SDI
CAB 00
CARD 00
PORT 1
DES SCH
BPS 9600
BITL 8
STOP 1
PARY NONE
FLOW NO
USER SCH
TTYLOG 0
BANR YES
ADAN TTY 2
TTY_TYPE SDI
CAB 00
CARD 00
PORT 2
DES CDR
BPS 9600
BITL 8
STOP 1
PARY NONE
FLOW NO
USER CTY
ADAN TTY 7
TTY_TYPE LSL
CAB 00
CARD 04
PORT 0
DES MIRAN
BPS 9600
BITL 8
STOP 1
PARY NONE
FLOWTYPE NONE
ADAN DCH 10
CTYP MSDL
CARD 01
PORT 1
DES ONRAMP
USR PRI
DCHL 1
OTBF 32
PARM RS422 DTE
DRAT 64KC



TTY 0 : ENBL DES: MAINT.MODEM
TTY 1 : ENBL DES: SCH
TTY 2 : ENBL DES: CDR
TTY 7 : DSBL DES: MIRAN

 

[johnpoole]

is your miran card up and happy?, looks like that is the intended use for the tty, i don't remember building a tty for a miran, i can check the books tomorrow.. off today

john poole
bellsouth business
columbia,sc

 

[janchundia]

Is the MIRAN working now??
Can you access with >ax 7 the MIRAN Administration ?

 

[I2007]

What kind of Miran are you using. Miran 3???

If so the most common problem is that you haven't set any IP adress on the card and it's in bootp modus. Then it waits for a DHCP address on every startup. You have to either disable the ip or set an static address or there's something wrong with your ip connection.

This was just a thought since I've had that problem myself.

i2007

 

[dirkfuzzbucket]

Thanks for the help looks like bootp kicked in when the miran was reset. It is functioning correctly but with the above error. I will visit site and log into the front to see if I can disable the network.