ambiguous redirect

[Shuegli]

Hello

I installed a new Dedicated Storage node.
I use Red Hat ES4.(normaly we use ES3)
We use a Fibre-Channel for the Data transfer and a 100MB for the protocol.

When i install the lgtodrvr package i have the following error

/var/tmp/rpm-tmp.90775: line 11: ${file}: ambiguous redirect

i could install the other Legato packages without any problem.

Normaly we make a redirect on the Legato Server with the jbedit commando.
and then we have on the dedicated Storage node 1 nsrmmd process runing for ever LTO.

but with this server it didnt work i could do the redirect but the legato Server cant start the nsrmmd on the node.

Has enyone an idee what the problem could be?

Thanks for the help
Stephan

 

[605]

This might point to either a compatibility issue or an incomplete install.

I have used NW 7.3 with RH 4 a while ago and did not encounter any such problem.

 

[Shuegli]

You are right 605

But i have the same message evey time i install the rpm.

My NW is 7.2

Stephan

 

[605]

Whatever this is responsable for, it looks that there is a problem in the ?script?

What exactly do you mean by 'redirecting'?

 

[Shuegli]

Hello 605

We Backup our Datas the following way.

In every Network Zone we have a Legato Dedicated Storage Node.
The Dedicated Storage Node collects all the Data via rsync from the Servers in that Zone.

The Dedicated Storage Node is with a 100M/B Network connectet to the Legato Server. The Server has also a Emulex Fibre-Channel card.

Our LTO1 are all connected with Fibre-Channel.

So we send the Datas over Fibre and the Protocol Datas (the infos for the Legado DB) over the 100BM Net.

when we install an new Dedicated Storage Node we make a rd (redirect) for alle the LTO1 we need.
We do that with the "jbedit -a" command.
and in the Networker Administator window you see then the "new" LTOs.
For example:
rd=bckst1zhh:/dev/IBMtape1

On the Dedicated Storage Node runs:
2 nsrexecd
and for ever LTO 1 nsrmmd
Process.

With Red Hat ES3 that work fine.

But now i Installed a new one with ES4

The problem is now:
I have the Install error i wrothe above.
And Legato Server cant Start the nsrmmd on the new Dedicated Storage Node.

Stephan

 

[605]

Sorry, but i can't help you any further as there are obviously a lot of situations, where such error will occur. I am thinking of a missing package.

However, did you look up the Compatibility Guide at all? -
NW 7.2 is listed as NW Client, not as SN/Server. In this case you should update.

As i mentioned already, NW 7.3 and RH 4 was not a problem for me. But i never tested NW 7.2 and RH 3.

 

[a060463xyz]

I have seen the sam behaviour, to me it looks like
the storagenode component of NW 7.2.x can only be installed on linux with an 2.4.x kernel [RHEL 3.0].
If you want to use an 2.6.x [RHEL 4.0] Linux Kernel you have to use NW 7.3.x