drichter12
Technical User
What am I missing? Here is the scenario...
ARS Dig Dialed = 91 + 10
Route List 1
We lost power to the SIP MBG which takes down all 4 SIP peers. This should have still left the PRIs as a viable destination but outbound calls would time-out and fail. I confirmed the PRIs were up and working and there were inbound calls on them as well as available trunks for outbound. The COR is the same for both the TDM and SIP trunks as well. Any suggestions or guidance would be appreciated.
Mitel 3300 MXe-II
MiVB 4.2 (10.2.0.26_2)
Thanks,
Dale
ARS Dig Dialed = 91 + 10
Route List 1
1. SIP Peer1
2. SIP Peer2
3. SIP Peer3
4. SIP Peer4
5. TDM Trunk Group1 (PRIs)
We lost power to the SIP MBG which takes down all 4 SIP peers. This should have still left the PRIs as a viable destination but outbound calls would time-out and fail. I confirmed the PRIs were up and working and there were inbound calls on them as well as available trunks for outbound. The COR is the same for both the TDM and SIP trunks as well. Any suggestions or guidance would be appreciated.
Mitel 3300 MXe-II
MiVB 4.2 (10.2.0.26_2)
Thanks,
Dale