allowing split tunnel and same interface traffic HELP!!!

[Jbabio]

I have both split tunnel and same interface traffic allowed but the damn pix still won't route my traffic back to allow me both access to the vpn and access to the regular network. I am running PIX v.7.0(2). I also have local lan access set on the vpn client. What else does it need?

JOhn B. CCNA, CCDA, MCSA, NETWORK+, A+

 

[aisdale]

can u paste some of your config ?

 

[Jbabio]

same-security-traffic permit intra-interface
ip local pool vpnpool 172.16.1.1-172.16.1.254 mask 255.255.255.0

nat (inside) 0 access-list nonat

crypto ipsec transform-set trmset1 esp-aes-256 esp-sha-hmac
crypto dynamic-map map2 10 set transform-set trmset1
crypto map map1 10 ipsec-isakmp dynamic map2
crypto map map1 interface outside
isakmp identity address
isakmp enable outside
isakmp policy 10 authentication pre-share
isakmp policy 10 encryption aes-256
isakmp policy 10 hash sha
isakmp policy 10 group 2
isakmp policy 10 lifetime 86400

JOhn B. CCNA, CCDA, MCSA, NETWORK+, A+