Upgraded an IPO 500 V1 Release 4.2 to IPO 500 V2 Release 9.0400.965 using export config. Now in the IP Extension VoIP Tab the Allow Remote Extension Option is missing. Even if I create a new H323 Extension, this option is still missing in the VoIP tab. Some of the extension did have VPN Enable checked on the original system on 4.2. This is very similar to thread940-1723713 don't know if there is a resolution.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Allow Remote Extension Option Missing
- Thread starter joeloh
- Start date
- Thread starter
- #2
9.0 changed this option.
You do not longer need to enable it on the extension but only on the user.
The system knows that the user is logged in on the extension and allows it as a remote extension.
BAZINGA!
I'm not insane, my mother had me tested!
You do not longer need to enable it on the extension but only on the user.
The system knows that the user is logged in on the extension and allows it as a remote extension.
BAZINGA!
I'm not insane, my mother had me tested!
- Thread starter
- #4
amriddle01
Programmer
Just be aware that since they did this it no longer ignores the Direct Media Path setting as it did previously so turn that off, you should anyway but it's worth knowing 
- Status