Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Allow 976 for 1866 calls 2

Status
Not open for further replies.
byrontel

byrontel

Vendor
Jul 24, 2003
324
0
0
CA
Trying to allow 1-866-976-xxxx calls.
This is a CS1000 Rel 3 with nars bars.
Route List 1 where 1866 resides denies 976.
Can someone point me in right direction?
 
Sort by date Sort by votes
have you checked ld 90 NPA or SPN to see if that is where that is denied instead of 86?
ld 90
chg
0
net
ac1
spn
spn 1866

sddr - deny
deny x976


Mato' Was'aka
 
Upvote 0 Downvote
Thanks for your help...had to get a service provider to dial in and make changes in esn programming. Was tied up with other things....appreciate the advice in any case.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

bltodd
  • Locked
  • Question
ERR008 Digital and Analog Calls in Hang up after initial connection. Calls to outside hangup Fax too
Replies
0
Views
58
bltodd
bltodd
krtcomm1
  • Locked
  • Question
CLID on tandem calls outbound to PSTN when calls are forwarded externally
Replies
6
Views
94
krtcomm1
krtcomm1
nihaalrai236
  • Question
Nortel Option 11C RLS 25 asking for "MODL"
Replies
4
Views
326
Firebird Scrambler
Firebird Scrambler
notaphoneguy27
  • Locked
  • Question
CS1000 cannot make outbound calls
Replies
5
Views
117
Firebird Scrambler
Firebird Scrambler
fishhead64
  • Locked
  • Question
remove SDRR to allow calls to go out normally
Replies
4
Views
61
bignose21
bignose21

Part and Inventory Search

Sponsor

Back
Top