All my ROUTs

[chancal]

Hello,

I look at all my NPAs and they all point to RLIs that use ROUT 9. This is what throws me off, what is this ROUT 9?
It would make much more sense if ROUTs 13 or 50 were used as these are my PRIs. What am i not seeing? thanks

REQ: ltm
CUST 0
ROUT
ACOD

TYPE TLST
TKTP COT
ROUT 9
DES CBCT_OUT

TYPE TLST
TKTP MUS
ROUT 12
DES MUSIC
TN 003 0 00 00 MBER 1 MUSIC

TYPE TLST
TKTP TIE
ROUT 13
DES I3TIE
TN 002 01 MBER 1 TIE
TN 002 02 MBER 2 TIE
TN 002 03 MBER 3 TIE
TN 002 04 MBER 4 TIE
TN 002 05 MBER 5 TIE
TN 002 06 MBER 6 TIE
TN 002 07 MBER 7 TIE
TN 002 08 MBER 8 TIE
TN 002 09 MBER 9 TIE
TN 002 10 MBER 10 TIE
TN 002 11 MBER 11 TIE
TN 002 12 MBER 12 TIE
TN 002 13 MBER 13 TIE
TN 002 14 MBER 14 TIE
TN 002 15 MBER 15 TIE
TN 002 16 MBER 16 TIE
TN 002 17 MBER 17 TIE
TN 002 18 MBER 18 TIE
TN 002 19 MBER 19 TIE
TN 002 20 MBER 20 TIE
TN 002 21 MBER 21 TIE
TN 002 22 MBER 22 TIE
TN 002 23 MBER 23 TIE

TYPE TLST
TKTP DID
ROUT 20
DES CBCT_DID

TYPE TLST
TKTP CBCT
ROUT 50
DES 12IPCD791959
TN 001 01 MBER 1 MEGALINK
TN 001 02 MBER 2 MEGALINK
TN 001 03 MBER 3 MEGALINK
TN 001 04 MBER 4 MEGALINK
TN 001 05 MBER 5 MEGALINK
TN 001 06 MBER 6 MEGALINK
TN 001 07 MBER 7 MEGALINK
TN 001 08 MBER 8 MEGALINK
TN 001 09 MBER 9 MEGALINK
TN 001 10 MBER 10 MEGALINK
TN 001 11 MBER 11 MEGALINK
TN 001 12 MBER 12 MEGALINK
TN 001 13 MBER 13 MEGALINK
TN 001 14 MBER 14 MEGALINK
TN 001 15 MBER 15 MEGALINK
TN 001 16 MBER 16 MEGALINK
TN 001 17 MBER 17 MEGALINK
TN 001 18 MBER 18 MEGALINK
TN 001 19 MBER 19 MEGALINK
TN 001 20 MBER 20 MEGALINK
TN 001 21 MBER 21 MEGALINK
TN 001 22 MBER 22 MEGALINK
TN 001 23 MBER 23 MEGALINK

 

[Tigernach]

COT route with no trunks built on it. I know it's a generic answer, but that's all it is.

 

[allenmac]

If you print the RDB for Route 9 and also 1 or 2 of your RLI's then we can give you a more definitive answer.

 

[johnpoole]

isa routes.. type cbct.. call by call type.. that insures that all trunks will not be used for inbound or outbound,, also call isa routes.. old school and used a lot in Canada back in the day.. 9 is your master route, a call sent to route 9 looks at your other routes.. you should have a isa master route in and anouther master out..

john poole
bellsouth business
columbia,sc

 

[Reusser]

John is correct except Route 50 would be your Master Route and route 9 used for out calling and route 20 used for inbound calls.

Call-By-Call is a service with your telco provider where all calls use same trunks but are tagged differently. Not many use. But back in the day before 2-way DID it was the cats meow.

 

[chancal]

Here is a print of the rdb of the routes:
ROUT 9
DES CBCT_OUT
TKTP COT
NPID_TBL_NUM 0
PRIV NO
SAT NO
RCLS EXT
VTRK NO
NODE
DTRK YES
BRIP NO
DGTP PRI
ISDN YES
MODE PRA
IFC NI2
CBCR YES
RTN 50
SRVC 0
IEC ---
MAX 23
NCOS 0
SBN NO
PNI 00000
NCNA YES
NCRD YES
CPFXS YES
CPUB OFF
DAPC NO
BCOT 0
INTC NO
DSEL VOD
PTYP PRI
AUTO NO
DCDR NO
ICOG OGT
RANX NO
SRCH LIN
STEP
ACOD 7009
TCPP NO
TARG 01
CLEN 1
OABS
TIMR ICF 512
OGF 512
EOD 13952
NRD 10112
DDL 70
OOD 3
ODT 4096
RGV 640
FLH 510
GRD 896
SFB 3
CRD 512
NBS 2048
NBL 4096
TFD 0
LEXT 100
CDR YES


PAGE 002

INC NO
LAST NO
QREC NO
OAL YES
AIA NO
OAN YES
OPD NO
CDRX NO
NATL YES
MUS YES
MRT 12
EQAR NO
FRL 0 0
FRL 1 0
FRL 2 0
FRL 3 0
FRL 4 0
FRL 5 0
FRL 6 0
FRL 7 0
TTBL 0
ATAN NO
PLEV 2
MCTS NO
ALRM NO
ART 0
SGRP 0
AACR NO

TYPE RDB
CUST 00
DMOD
ROUT 12
DES MUSIC
TKTP MUS
NPID_TBL_NUM 0
VTRK NO
NODE
ICOG OGT
SRCH LIN
STEP
BDCT NO
ACOD 7012
TARG
CLEN 1
OABS
TIMR ICF 512
OGF 512
EOD 13952
DSI 34944
NRD 10112
DDL 70
ODT 4096
RGV 640
GRD 896
SFB 3
SST 5 0
NEDC ETH
FEDC ORG
HOLD 02 02 40
SEIZ 02 02
RGFL 02 02
CDR NO


PAGE 003

MUS NO
TTBL 0
OHTD NO
ALRM NO
SGRP 0
AACR NO

TYPE RDB
CUST 00
DMOD
ROUT 13
DES I3TIE
TKTP TIE
NPID_TBL_NUM 0
ESN NO
CNVT NO
SAT NO
RCLS INT
VTRK NO
NODE
DTRK YES
BRIP NO
DGTP PRI
ISDN YES
MODE PRA
IFC ESS5
SBN NO
PNI 00000
SRVC NNSF
NCNA YES
NCRD NO
CHTY BCH
CTYP CDP
INAC NO
ISAR NO
CPUB OFF
DAPC NO
BCOT 0
DSEL VOD
PTYP PRI
AUTO NO
DNIS NO
DCDR NO
ICOG IAO
SRCH LIN
TRMB YES
STEP
ACOD 7913
TCPP NO
PII NO
TARG 01
CLEN 0
BILN NO
OABS
INST
ANTK
SIGO STD
ICIS YES
TIMR ICF 512
OGF 512
EOD 13952
NRD 10112
DDL 70


PAGE 004

ODT 4096
RGV 640
GRD 896
SFB 3
NBS 2048
NBL 4096
TFD 0
DRNG NO
CDR NO
MUS NO
FRL 0 0
FRL 1 0
FRL 2 0
FRL 3 0
FRL 4 0
FRL 5 0
FRL 6 0
FRL 7 0
AUTH NO
TTBL 0
ATAN NO
PLEV 2
ALRM NO
ART 0
SGRP 0
AACR NO

TYPE RDB
CUST 00
DMOD
ROUT 20
DES CBCT_DID
TKTP DID
NPID_TBL_NUM 0
SAT NO
RCLS EXT
VTRK NO
NODE
DTRK YES
BRIP NO
DGTP PRI
ISDN YES
MODE PRA
IFC NI2
CBCR YES
RTN 50
SRVC 0
IEC ---
MAX 23
NCOS 1
SBN NO
PNI 00000
NCNA YES
NCRD YES
CPFXS YES
CPUB OFF
DAPC NO
BCOT 0
INTC NO
DSEL VOD
PTYP PRI
AUTO NO
DNIS NO


PAGE 005

DCDR NO
ICOG ICT
STEP
ACOD 7020
PII NO
TARG 01
CLEN 1
BILN NO
OABS
INST
ICIS YES
TIMR ICF 512
OGF 512
EOD 13952
NRD 10112
DDL 70
ODT 4096
RGV 640
FLH 510
GRD 896
SFB 3
NBS 2048
NBL 4096
DRNG NO
CDR NO
MUS YES
MRT 12
FRL 0 0
FRL 1 0
FRL 2 0
FRL 3 0
FRL 4 0
FRL 5 0
FRL 6 0
FRL 7 0
TTBL 0
ATAN NO
PLEV 2
MCTS NO
ALRM NO
ART 0
SGRP 0
AACR NO

TYPE RDB
CUST 00
DMOD
ROUT 50
DES 12IPCD791959
TKTP CBCT
NPID_TBL_NUM 0
VTRK NO
NODE
DTRK YES
BRIP NO
DGTP PRI
ISDN YES
MODE PRA
IFC NI2
IPUB 20
SBN NO
PNI 00000
SVRT 9


PAGE 006

20
NCRD YES
CHTY BCH
DCDR NO
ICOG IAO
SRCH LIN
TRMB YES
ACOD 7050
TCPP NO
TARG
CLEN 1
BILN NO
OABS
ICIS NO
TIMR ICF 512
OGF 512
EOD 13952
NRD 10112
DDL 70
ODT 4096
RGV 640
GRD 896
SFB 3
NBS 2048
NBL 4096
DRNG NO

 

[chancal]

Ok. So here's my next question, to my end result of what i am trying to do.

At this moment i have a PRI (ROUT 50) and a TIE (ROUT 13)hooked up directly to the pbx.

I am putting a cisco gateway in front of the option11. The pri will be unplugged from the option11 and plugged into the GW. The TIE will be connected between the GW and the Option11. So all inbound DID traffic will come in on the PRI and get routed by the GW to the option 11, outbound will go out the option 11 out the tie and routed by the GW etc etc.

The reason i was thinking about the ROUTs in my option 11 was because i thought i may need to change all my RLI's to point to my TIE ROUT #13.

But (please confirm Johnpoole or Resusser) if ROUT 9 is a master ROUT that looks at all other possible ROUTs, would that imply that i dont need to make any changes at all?
As far as the option 11 is concerned, it doesnt care the PRI is "gone" now, it will just keep looking until it finds a usable ROUT? do i need to do anything at all to the option11?

 

[johnpoole]

your box will nothave outbound if you out rdb 9.. the pri you are going to out needs to be diasbled.. take the trunks out..

the tie your going to use will not come up until you put it in qsig.. ni2 interface and cisco is not going to work.. you may be a little light to reprogram all your trunks and rlbs at this time.. any changes you make on a isa have got to be matches by the provider.. a mismatch will lock all all the channels or just stop traffix

john poole
bellsouth business
columbia,sc