Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

All changes lost after restart 1

Status
Not open for further replies.

sofa44

Technical User
Oct 12, 2006
3
NO
Hi.

I have a MD110 in my lab at home, and after a powerdown all changes I made are lost.
How is this posible?

VERSION=CXP1010007/3/BC11SP8/R4A

Regards
Roy Michelsen
 
Hi.

No, I didn't.
I only use this MD for testing purposes, so no harm done.
It's just very annoying after spending some hours changing things, and after a powercycle everything is gone..

Best regards
Roy Michelsen
 
Just like if you use a PC and don't save your work :)
 
Just try:
DUSYI:pRINT=RESULT;
as soon as you type this command you can logoff...

 
Only for serial port.
If you use network to the MD and logoff you are disconnected and will newer see the printout...

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top