ALL Analogus Extensions not WORKING!!!

[admiralzino]

Dear all,

I'm in a tight corner. in one of my sites, all the analogue extensions connected to MAG1 are not working!! analogue extensions on MAG 0 are working and digital extensions are also working. i've exhausted all ideas. does someone have an idea what the problem is? MD revision is

VERSION: CXP1010101/4/TSWSP02/R3A

thanks.

The Admiral

 

[whosrdaddy]

maybe you have a defective board?

please do a CNLIP:LIM=1,DEV=YES; and ALLOP;

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[admiralzino]

See below for cnlip printout. the alarm log is cleared.

<CNLIP:LIM=1,DEV=YES;

LIM CONFIGURATION
LIM NUMBER 1
LIM CONTROL LIM CONTROL NUMBER OF SERVICE
SYSTEM SIDE SYSTEM STATE PCM-LINKS STATE LIM
A EXECUTING 0 ACTIVE
B EQUIPPED
MEMORY MEMORY MEMORY SPARE
VOLUME SPARE AFTER PACKING
65535 KB 11820 KB 11820 KB
BUAR1 4020 KB BUAR2 3136 KB

DEVICE BOARDS
NUMBER OF
BPOS BOARDID INDIVIDUALS SERVICE STATE
001-0-00 NOT EQUIPPED
001-0-01 NOT EQUIPPED
001-0-02 NOT EQUIPPED
001-0-03 NOT EQUIPPED
001-0-10 102 32 ACTIVE
001-0-20 57 32 ACTIVE
001-0-30 87 16 ACTIVE
001-0-32 87 16 ACTIVE
001-0-40 87 16 ACTIVE
001-0-42 87 16 ACTIVE
001-0-50 NOT EQUIPPED
001-0-51 NOT EQUIPPED
001-0-52 NOT EQUIPPED
001-0-53 NOT EQUIPPED
001-0-60 106 16 ACTIVE
001-0-62 NOT EQUIPPED
001-0-63 96 1 ACTIVE
001-0-70 87 16 ACTIVE
001-0-72 31 8 PASSIVE
001-0-73 42 4 ACTIVE
001-1-00 NOT EQUIPPED
001-1-01 NOT EQUIPPED
001-1-02 NOT EQUIPPED
001-1-03 NOT EQUIPPED
001-1-10 102 32 ACTIVE
001-1-20 77 16 ACTIVE
001-1-22 77 16 PASSIVE
001-1-30 87 16 ACTIVE
001-1-32 NOT EQUIPPED
001-1-33 NOT EQUIPPED
001-1-40 NOT EQUIPPED
001-1-41 NOT EQUIPPED
001-1-42 87 16 ACTIVE
001-1-50 87 16 ACTIVE
001-1-52 87 16 ACTIVE
001-1-60 87 16 ACTIVE
001-1-62 NOT EQUIPPED
001-1-63 NOT EQUIPPED
001-1-70 77 16 ACTIVE
001-1-72 NOT EQUIPPED
001-1-73 42 4 ACTIVE


END

 

[admiralzino]

we've been able to resolve the problem. the REU card and PU4DC cards were replaced with RG5DC card. and the extensions started working.

but i'm still wondering what the real problem was. REU only provides ringing; TMU provides the tone and still the non working extensions had no tone - were "dead". Now after replacing the REU, they are all working. any explanation for this?


thanks for your assistance.

rgds,

The Admiral

 

[whosrdaddy]

could be a tension problem on the PU4DC.

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!