AIX config 2nd gateway

[alpboy]

Hello

I have the F-50 box run aix 4.3 with the network config as frame replay service
default IP 192.168.1.xxx
gateway 192.168.1.1
these config run for internal network under Cisco router
and now
i have the DSL connection with sonicwall router
ip 192.168.1.2 as default and gateway IP

two router Cisco and sonicwall comming into 1 switch
and 2 Lan rand IP can see each other

in the F-50 i have webserver and telnet
i want my user can accept from the internet throught the sonicwall router

i already set firewall in sonicwall and map the Lan ip of F-50 into it

but there are only user inside my network (LAN) can be login my webserver and telnet the other (outside my network) can not

the problem it the gateway betweent F-50 and sonicwall router

the F-50 the gateway is 192.168.1.1
the sonicwall router is 192.168.1.2

any idea or suggestion will be greate appriciated

regard,

 

[brossob]

I am not sure i understand your question but i think you need to add routes to your aix machine.

try : man resolv.conf

resolv.conf is a file that contains a routing table for your machine.

Good luck

brossob