Aironet Radios AND Trunking....

[FastHackem]

This is a dumb question but I need to make sure on what I'm doing. On the trunked port, I connect the radio right. Dummy me had the router on it. I am using wireless test model to send vlan information over. By the way since I am doing 2 vlans, 1 radio per, and am having to trunk 2 ports on the switch. I assume this is right?? I have also allowed all vlans except 1 on trunk port fa 0/2, is this right??

Thanks,

Eric

 

[FastHackem]

Oh and another thing,

Since the 2 1600 series routers can't do encapsulations on sub-interfaces, I had use e0 and e1 (i per vlan). I connect e0 to a vlan1 assined port on the switch and e1 to vlan2 """""". Is this correct??