Aggregate G.SHDSL

[CiscoCiscoDuck]

Any SP's out there who are aggregating G.SHDSL routers? We currently bookend Cisco 828/838/878 routers with one in the CO and one on the customer prem. However this is becoming unwieldy and we would like to have one device in the office to terminate multiple customer G.SHDSL devices. We are trying to use Cisco 2811/2821 with HWIC-4SHDSL modules, however we can only see to create 2 logical groups and therefore 2 connections per HWIC. Any experiance out there in this?

 

[plshlpme]

ive never looked at these. but it looks like there is a 6000 series switch with 8 port g.shdsl cards

http://www.cisco.com/en/US/partner/...ature_guide09186a00800ca18a.html#xtocid102151

not sure if that helps you at all...

 

[CiscoCiscoDuck]

It might have once upon a time, but they are all EOL.

http://www.cisco.com/en/US/products/hw/switches/ps298/products_eol_models.html

Thanks for trying tho.

 

[plshlpme]

so is G.SHDSL a new version of HDSL?
can you get a third party vendor to provide the hardware and then use a serial wic in the router?

we use pairgains for hdsl...
and if its frame-relay we stick paradyne's on the end of them.
At the co the pairgains would be muxed into a dacs.. into a chanelized ds3 then into the edge router or other means of distribution.

sorry ive never worked with g.shdsl before though..