Agents cannot log in UI 1

[vladcbv]

Hy guys,

I have this common problem I see here about Agents getting error messages when singing in. "The connection to the telephone system is interrupted"

So I have checked the system password and it's ok.
Agents have Telephony enabled.
I have required licenses.


I get errors in TTrace -> IPO-> Taskserver_IPO :

G3824b 10:04:39.324 TC_Warning TSTSPISocketConnection(192.168.42.1:50797)::connect_complete: error=system:10060 -> close connection!
G3825b 10:04:39.324 TC_Warning TSTSPISocketConnection(192.168.42.1:50797)::do_close: called - notifying...
G3826b 10:04:39.324 TC_General TSTAPIEventCBTSPICloseSocketConnection:rocess()
G3827b 10:04:39.324 TC_Warning TSTSPIEventReceiver:nDisconnected Socket=192.168.42.1:50797
G3828b 10:04:39.324 TC_Warning TSTspiManager:nTSPISocketDisconnected notifying all devices...pSocketCon host=192.168.42.1 port=50797
G3829b 10:04:39.324 TC_General TSTAPIEventCBLinkLost:rocess() pbxIp=192.168.42.1 starting pbx reconnect in 30sec
G3854b 10:05:09.344 TS_PABXCSTALinks TSOperationProcessor(PBXServer)::TSOPPabxStartCommunication:nExecute() tspi type= 1 )
G3855b 10:05:09.344 TS_TSPISocket TSTSPISocketConnection(192.168.42.1:50797)::connect_start: deadline timeout 60sec
G3867b 10:05:30.339 TC_Warning TSTSPISocketConnection(192.168.42.1:50797)::connect_complete: error=system:10060 -> close connection!
G3868b 10:05:30.339 TC_Warning TSTSPISocketConnection(192.168.42.1:50797)::do_close: called - notifying...
G3869b 10:05:30.339 TC_General TSTAPIEventCBTSPICloseSocketConnection:rocess()
G3870b 10:05:30.339 TC_Warning TSTSPIEventReceiver:nDisconnected Socket=192.168.42.1:50797
G3871b 10:05:30.339 TC_Warning TSTspiManager:nTSPISocketDisconnected notifying all devices...pSocketCon host=192.168.42.1 port=50797
G3872b 10:05:30.339 TC_General TSTAPIEventCBLinkLost:rocess() pbxIp=192.168.42.1 starting pbx reconnect in 30sec


The Chap is syncronized..

I ran out of options,.. what am I doing wrong?

Do you have any clues?
Thank you
Vlad C.

 

[vladcbv]

Ok problem fixed..

I didn't have TAPI enabled under Security Settings for IPO ..

Hope this will help others though!

Have a good one!

 

[janni78]

Pretty common to miss that the first time =) Star for posting solution.

"Trying is the first step to failure..." - Homer

 

[vladcbv]

Well i have installed this couple of times with no problem..
I thought TAPI was enabled by default and never checked it!

Case closed!

 

[Tarvez]

Check TAPI settings in IPOffice Security, TAPI should enabled